Page 14 - Machine Catalog 2017 By Zika Welding

MIG 250GS

One Phase MIG Welding Machine
(Internal Feeder) Combined With
Welding Electrode Machine

DESCRIPTION AND APPLICATION
Digital display for the welding current, wire speed and welding voltage
Pre-set parameters on a digital display, welding cycle 2T or 4T,
adjust the inductance
Equipped with reverse polarity for special wire Gasless Welding.
The MMA (Stick) welding process is equipped with the functions
Hot Start, Arc force and Anti Sticking.
over-loading and over-heating protection.
Compact Design with Gas Cylinder Trolley.

SET SPECIFICATION
25mm2 section earth cable, 3m length & Earth connection handle.
Mig welding torch 24/3m.
Pressure regulator for CO2 gas + electric heater for preventing freezing
at gas outlet.
2 meter standard power cable and standard approved Israeli type three phase plug.

Input voltage (V) 380±15% 50/60HZ
Required fuse (A) 16
Wire speed (m/s) 2-16
Wire Diameter (mm)
Current range (A) 0.8-1.2
Current at 60% efficiency (A) 40-250
Work with generator
Weight (kg) 250
Open circuit voltage (V) +
Dimensions – mm (l/w/h) 45
60

940×400×665

14